Interface Upgrade to MPVI3

Trade in any previous generation HP Tuners interface, Standard or Pro, for the newest MPVI3 plus (4) or (6) additional Universal Credits (depending on what generation your trade-in device is).

The “upgrade process” transfers all the vehicle licenses and credits from your old device to your new MPVI3 device plus some extra credits so you can get started tuning right out of the return box! No need to purchase new licenses for all the vehicles you’ve previously licensed with that device.

How It Works

Step 1: To purchase this upgrade, you MUST be logged into your HP Tuners account and your OBDII device MUST be registered under My Devices. Then, select the serial number of the device you want to upgrade in the dropdown above.

Step 2: Once you have successfully purchased the upgrade service, please back up your old device. You can do this by opening VCM Editor and clicking HELP > RESYNC INTERFACE.

Step 3: Then, you’re ready to ship your old device to HP Tuners! Find shipping and service time information below.

 NOTE: HP Tuners is offering (4) or (6) additional, free credits per (1) upgrade service depending on the generation of the trade-in device. If sending in multiple old devices to upgrade to a single MPVI3 device, only one set of credits will be added to the new device (ex. [2] MPVI devices sent in for upgrading to [1] MPVI3 will only receive [6] total free credits).

 NOTE: This upgrade option does not include the PROLINK+ cable for trade-in Pro devices. However, you can add the PROLINK+ cable to your MPVI3 Interface Upgrade order. Please note that PROLINK+ is not required to use MPVI3.

Why Upgrade to MPVI3?

• Standard with Pro Feature Set
• Support for Universal Credits
• Access to new and existing vehicle support
• 8GB of onboard storage (2X more than MPVI2+)
• Fastest data logging and reading and writing speeds of any HP Tuners interface
• Bluetooth 5.0 connection
• Built-in high-resolution accelerometer
• M8 motorsports-grade screw-on connector (PROLINK+ sold separately)
• RGB status LEDs
• USB-C connectivity (4MB/s)

One thing to STRONGLY consider if you decide to purchase outright rather than upgrading is your tunerlock status. If you tunerlock vehicles on your MPVI1 we STRONGLY recommend that if you purchase an MPVI2 outright to use in parallel with your MPVI1 that you contact support requesting to have the tunerlock on both interfaces the same. This way if/when you combine your interfaces you won't have any issues read/flashing vehicles you've previously tunerlocked.