The Pro Feature Set is an enhancement to MPVI2 and MPVI2+ that takes the capabilities of these interfaces to the next level. Pro Feature Set is standard on MPVI3.
At present, purchasing the Pro Feature Set adds the following features:
■ | Support for Pro Link and Pro Link+ |
■ | Standalone Data Logging |
Pro Link and Pro Link+
The Pro Link and Pro Link+ are cables that allow additional inputs to be connected to the MPVI2, 2+ and 3 for enhanced data logging. This allows you to see these additional signals in VCM Scanner, potentially providing critical insights into how your tune is performing.
■ | Pro Link allows you to connect up to two analog signals (such as a wideband sensor or a map senor) and one CAN bus signal to an MPVI2. |
■ | Pro Link+ allows you to connect the same inputs to an MPVI2+ or MPVI3. |
When you purchase the Pro Feature Set for your MPVI2/2+, we will send you the version of the Pro Link cable that supports your interface.
Although Pro Feature Set comes standard on the MPVI3. The Pro Link+ cable must be purchased separately for this interface. To order, go to https://www.hptuners.com/product/pro-link-plus/.
Standalone Data Logging
Standalone Data Logging lets you log directly to the internal storage on your interface device without being tethered to a laptop. It is now easier than ever to collect data while driving. Easily record your vehicle’s data on the go with a press of a button or pre-set start/stop triggers. Then, at your convenience, evaluate and customize start/stop conditions right on your PC or laptop.
See MPVI2, 2+, and 3 Standalone Data Logging for more information.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article