MPVI3 and RTD Gen 3

Modified on Thu, 26 Oct 2023 at 08:55 AM

When using the VCM Suite to read information from a vehicle or write tunes to a vehicle, you will need to connect your computer to the vehicle. This requires an "interface device" that translates the many languages (protocols) used by vehicle on-board computing systems into the single language (protocol) used by HP Tuners software.

There are two current interface devices:

MPVI3
RTD Gen 3

VCM Suite 5.0 (or later) is required to support either of these devices.

Additionally, a number of older interface devices, such as the MPVI, MPVI2, and MPVI2+ are still supported by VCM Suite. However, these devices do not support the full range of features of the MPVI3.

MPVI3

mpvi3.png

This is our most recent interface device designed specifically for tuners. It supports the full range of features of the VCM Suite and the full range of features of the TDN app for mobile devices. Plus, it includes twice the storage of the MPVI2+ and a faster processor. Moreover, this device now includes a built in high-resolution accelerometer.

Pro Feature Set is now standard with this interface, but if you want to attach external inputs, you will need to purchase a Pro Link+ cable separately. External sensor inputs can often provide valuable insight into what's going on under the hood.

RTD Gen 3

rtd_gen3__nobranding.png

Tuners sometimes provide this device to their customers so that the customer can read tuning files from their own vehicle. This allows the customer to exchange these files with their preferred tuner, who is then able to adjust the vehicle's tune and monitor its performance remotely (RTD stands for "Remote Tuning Device").

These devices fully support the TDN app, which is the recommended software for users of these devices. Users who are interested in the powerful data logging features of VCM Scanner will find that application to be fully functional with RTD Gen 3 as well.

However, use of VCM Editor is NOT supported by this device. 

When used with the Pro Feature Set (including the Pro Link+), the RTD Gen 3 allows users to attach additional sensor inputs, which may provide valuable insight into what's going on under the hood.

In North America, This device is only available via direct sale to select, high volume tuning customers. Devices sold this way typically carry the tuner's company brand. They are not sold under the HP Tuners brand.

NOTE: Other than the differences noted above, initial setup and usage for RTD Gen 3 is identical to setup and usage for the MPVI3. Follow instructions for MPVI3 unless otherwise noted.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article