Setting Up Pro Link and Pro Link+

Overview:
The setup process for Pro Link and Pro Link+ is the same. The only difference between the two is compatibility:

• Pro Link connects to the MPVI2 and the original RTD interface.
• Pro Link+ connects to all later HP Tuners interface devices.

Analog Inputs:
You can connect up to two analog inputs, each in the 0-5V range. For step-by-step guidance on adding these inputs, please see Adding Pro Link and Pro Link+ Analog Inputs.

CAN Bus Inputs:
The Pro Link is also capable of receiving messages from a 500 kbps CAN bus. For instructions on adding a CAN bus input, refer to Adding a CAN Bus Input.

Attachments (1)

PROLINK.jpeg
48.7 KB