Setup for Pro Link and Pro Link+ is identical. The only difference is that Pro Link connects to the MPVI2 and the original RTD. Pro Link+ connects to all later interface devices.
Analog Inputs
Up to two analog inputs can be connected, with each input in the 0 - 5 V range. See Adding Pro Link and Pro Link+ Analog Inputs for instructions.
CAN Bus Inputs
The Pro Link can also receive messages from a 500 kbps CAN bus. See Adding a CAN Bus Input for instructions.
Attachments (1)
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article