FRPP Crate PCM and Aftermarket Calibration Support: Extra Steps

For the FRPP Crate Engine Controls packs we support and certain aftermarket calibrations, the controller is not automatically identified by the VCM Editor software.

You must verify your controller type and select the appropriate controller in order to read and license the calibration. (See Screenshots below.)

At the end of the read, you will be prompted to generate an OSID for the controller:

Hit OK to complete the process required for licensing.

Now you can license and flash the controller.

ECU Identification

The following images should help when trying to identify an ECU.

Copperhead

TC-1767

TC-1797

TC-1791

Attachments (8)

vehicle_reader2.png
9.25 KB

vehicle_reader3.png
9.42 KB

Error_genera....png
7.88 KB

vehicle_reader4.png
9.48 KB

copperhead_e....jpeg
76.1 KB

TC-1767_ECU_....jpeg
85.3 KB

TC-1797_ECU_....jpeg
110 KB

TC_1791_ECU_....jpeg
113 KB