Disabling VATS on Non-Alloytec V6 Car PCMs

To disable Vehicle Anti-Theft System (VATS) on non-Alloytec V6 car PCMs, follow these steps:

1. Set the VATS value to PWM.
   
   
   
   
2. Set DTC P1626 to 3 - No Error Reported.
3. Set DTC P1629 to 3 - No Error Reported.
   
   
   
   

Additional Adjustments (If Needed)

If the vehicle still experiences issues, also modify the following:

4. Set DTC P1630 to 3 - No Error Reported.
5. Set DTC P1631 to 3 - No Error Reported.
   
   
   
   

After making these changes, write the updated calibration to the PCM and verify the vehicle starts and runs as expected.

Attachments (3)

vatspwm.png
5.32 KB

1626and1629_....png
11 KB

p1630p1631_8....png
10.3 KB