The Trans Clean functionality can be found in Vehicle Controls & Special Functions.
1. | Before starting the procedure, you must log the PID "Cleaning Status" in the scanner to be informed of the current process status. Enable conditions: Engine running at idle, vehicle not moving, transmission selector in Park, transmission temperature 70 - 110 Degrees Celsius. |
2. | Begin the transmission cleaning procedure. |
NOTE: During this test, the engine speed will increase and decrease automatically and various clutch noises may be heard from the transmission.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article