Knowledgebase
Knowledgebase : Support > MPVI2
To RESYNC YOUR MPVI2, 1) Ensure your computer is connected to the internet 2) Connect your MPVI2 to the computer  3) Open VCM Software, Click "Help" and select "Resync Interface"
TO ADD YOUR MPVI2 TO YOUR ACCOUNT PLEASE PERFORM THE FOLLOWING: 1) Log-in to your Account at https://www.hptuners.com/my-account/ [https://www.hptuners.com/my-account/]      2) Click your name or "Welcome" at the top of the screen. 3) Select “My Device...
TO GET THE VERIFICATION ID FOR MPVI2, PLUG YOUR INTERFACE INTO YOUR COMPUTER AND  GO TO THE "HELP" MENU INSIDE VCM EDITOR OR VCM SCANNER AND CLICK "MPVI2 VERIFICATION CODE." The software will generate the code and you can then enter it on the My Devices...
If you receive the "401 Unauthorized" error, this indicates your time/date settings are not properly set for your region. To resolve this ensure your Time/Date settings are correct. You will have to ensure the Date, Time and Time Zone settings are correc...
Pro Feature Set enables the use of the latest senor input/output hardware from HP Tuners, the Pro Link and Expander Hub . In addition to this, Pro Feature Set will in the future allow for; * Stand Alone Logging (vehicle dependent) * Built in Acceler...
ATTACHING YOUR PRO LINK CABLE TO A SOURCE Using instructions from the sensor you are using find the appropriate outputs to connect to the appropriate wiring on the Pro Link. You will find the Pinout below. • Black – GND • Red – Analog 1 • Blue – Analog ...
The Pro Feature Set and Pro Link give you the ability to log analog and CAN based signals through your MPVI2 interface. The two scenarios you will encounter when using your Pro Link will be measuring voltage and receiving CAN messages. MEASURING VOLTAGE*...
HOW TO CONNECT AN AA BATTERY TO YOUR MPVI2 PROLINK TO TROUBLESHOOT > In some instances you may be asked to troubleshoot your MPVI2 or > Prolink by connecting it to an AA battery to rule out a hardware > issue, here's a short how to. > > 1) You'll need t...