Knowledgebase: Support > VCM Scanner
Where do I find Trans Clean in VCM Scanner and how do I use it?
You will find the Trans Clean functionality in VCM Scanner- Controls and Special Functions

1) Before starting the procedure, you must log the PID "Cleaning Status" in the scanner to be informed of the current process status. Enable conditions: Engine running at idle, vehicle not moving, transmission selector in Park, transmission temperature 70 - 110 DegC.
2) Begin the transmission cleaning procedure.

* Please note during this test the engine speed will increase and decrease automatically and various clutch noises may he heard from the transmission.
(1 vote(s))
Not helpful

Comments (0)