Knowledgebase
Knowledgebase: Support
The data I just read isn't from my vehicle- pop up
On a growing number of vehicles/controllers we've found they they are unable to be read natively through the obd2 port, however these modules can be flashed without issue. To combat this when the software sees that this is one of those modules, the software will generate a stock calibration based off the vehicle information it detects. This is nothing to be alarmed about but understand if your vehicle had been previously tuned you WILL lose that tune that was in it as our software can only generate the STOCK calibration. If you are willing to accept that it is the stock calibration simply click ok & tune.

Click image for larger version. 

Name:	Pasted image at 2017_07_06 05_12 PM.png 
Views:	167 
Size:	10.1 KB 
ID:	71011
(0 vote(s))
Helpful
Not helpful