Knowledgebase
Knowledgebase: MPVI2
MPVI2 Pro Feature Set

Available now, Pro Feature Set enables the use of the latest senor input/output hardware from HP Tuners, the Pro Link and Expander Hub. In addition to this, Pro Feature Set will in the future allow for;

  • Stand Alone Logging (vehicle dependent)
  • Built in Accelerometer Logging
  • BlueTooth Flashing (vehicle dependent)
  • HPTnet Activation (MPVI2 display port)
    • Data Broadcasting
    • Wireless Sensors
    • Pro Link Support
    • Expander Hub Support

Pro Link with Pro Feature Set
Only need 1 to 3 inputs? Pro Link is the best solution for you, allowing 2x analog input signals and 1x CAN bus input signal simultaneously.

MPVI2 and Pro Feature Set
If you are a new owner buyer, existing owner, or simply want to upgrade your MPVI Std or Pro interface, here is how Pro Feature Set works for you;

  • New MPVI2 Buyer – Purchase an MPVI2 with Pro Feature Set and the Pro Link cable will come FREE in the MPVI2 box.
  • Existing MPVI2 Owner – Purchase Pro Feature Set and receive Pro Link for FREE (plus shipping).
  • Upgrade* MPVI Std Owner – Upgrade MPVI Std to MPVI2, you must also purchase Pro Feature Set to receive a Pro Link (plus shipping).
  • Upgrade* MPVI Pro Owner – Upgrade MPVI Pro to MPVI2, Pro Feature Set and Pro Link is provided FREE of charge (plus shipping).
  • Existing Upgraded MPVI2 Owner – Already upgraded your MPVI Pro to MPVI2, Pro Feature Set and Pro Link is provided FREE of charge (plus shipping) for a limited 

*When upgrading an MPVI to an MPVI2, your licenses and credits are transferred to your MPVI2. You will not receive the MPVI back. 



(0 vote(s))
Helpful
Not helpful