Knowledgebase
Knowledgebase: Support > VCM Editor
Disabling VATS on non-Alloytec V6 car PCMs
To disable VATS on non-Alloytec v6 car PCMs please follow the steps below:

1. Set the VATS value to "PWM"

2. Set DTC P1626 to "3 - No Error Reported"
3. Set DTC P1629 to "3 - No Error Reported"


Additionally you might need to set:
4. Set DTC P1630 to "3 - No Error Reported"
5. Set DTC P1631 to "3 - No Error Reported"
(2 vote(s))
Helpful
Not helpful

Comments (0)