After unboxing a brand new MPVI2, 2+, or 3, you will want to make sure it is up to date with all of the latest files and firmware. The following steps will help you get started with your device, and will also allow you to resync to get the newest updates.
Before You Begin
Ensure that:
| ￭ |
Your computer is connected to the Internet. |
| ￭ |
The current version of the VCM Suite is installed. |
Updating Device Drivers
When used with a computer running Windows 10 (or later), the MPVI2+ and MPVI3 are completely "Plug and Play" devices. You do not need to manually update their drivers.
If you are preparing an MPVI2+ or MPVI3 for use with a Windows 7 or 8 computer, contact Customer Support for setup instructions.
MPVI2
| 2. |
Download the MPVI2 drivers. |
| 4. |
Unzip and install the drivers on your computer. |
Syncing the Interface
| 1. |
Connect your MPVI2, 2+, or 3 to your computer via the USB cable. |
| 2. |
Open VCM Scanner or VCM Editor. |
| 7. |
From the Help menu, select Resync Interface. |
| 8. |
If the Sync was successful, the progress bar will indicate that the operation is complete. |
Comments
0 comments
Please sign in to leave a comment.